Abstract:
After the harvest of paddy, it needs thorough drying to reduce its moisture content to
the safe level and to preserve the paddy. The method of drying and time of exposure to
heat or any other drying practices may affect the final grain quality of rice. A study was
conducted at Rice Research and Development Institute, with six popular rice varieties
(Bg 300, Bg 352, Bg 358, Bg360, Bg 306 and At 405) to investigate the effect of three
different drying procedures (sun, shade and mechanical diying) on rice grain quality
parameters. The treatments were triplicated and arranged in a completely randomized
design. Percentage of total milled rice (TMR), percentage of broken grains (BG), Grain
hardness (RG), Grain whiteness (WH) and cracked grain percentage (CR) were tested
according to the standard practices of International Rice Research Institute. Different
methods have influenced rice quality parameters differently except BR and TMR.
Except Bg 358, mean BG of all varieties, were significantly high in sun dried samples
compared to shade-dried. The increase of hardness in sun dried and electrical dried
were 14.6% and 8.95 respectively compared to shade dried. Mean value in CR (22.2)
was significantly higher in sun dried compared to others. Lowest CR was observed in
shade dried samples of Bg 300, Bg 352 and Bg 360 compared to other methods.
Different varieties showed different levels of significance on grain whiteness. Bg 300,
Bg 358, Bg 360 and At 306 were not influenced by any drying method for their
whiteness. Sun drying has mainly influenced the increase in BG, CR and RG in
varieties. However the quality parameters were governed not only by the method of
drying but also the variety and many other factors.
